Lonza Biologics Facility, PTS was the predominant E, I&C contractor on a New Bio tech facility in Portsmouth, NH.



 Lonza Biologics

General Contractor: Parsons Company
Project Description: The project consisted of 10 months duration with over 180,000 safe man hours worked on the project. Some of our areas of expertise in field units were areas such as Media Preparation, Buffer Preparation, Buffer Hold, Purification suites, CIP backbone, Fermentation, Harvest, Bulk Solvents and final fill areas to name a few. We were involved with the all instrumentation installations from mounting of instrument, tubing, cabling via field bus and profibus technologies, terminations and verification of over 25,000 devices. Our electrical work consisted of all UPS power delivery to field devices and all low/medium voltage VFD type motors on the project. We also installed all security, communication, door locks, device net, Roof fan, Gas tank farm conduits and some associated wiring for the same. We pulled over 750,000 feet of wire and terminated over 15,000 electrical devices, motors, disconnect and device net configurations.

PTS worked an aggressive schedule @ some periods of time 7 days a week 24 hours a day to meet our deadlines and still bring the project to a safe and quality closure. Our installation was required to meet all local, state and FDA required standards along with NEC codes for installation methods and was final inspected by the FDA and the State of new Hampshire electrical board with a follow up completion final with the New Hampshire  State fire marshal with an outstanding report of completion with high remarks for quality.

Smith-Nephew Facility Improvements in Largo, Florida



 Smith-Nephew, Inc.

General Contractor: The Murray Company
Project Description: This project consists of the interior renovation to an existing manufacturing area of a sanitary chemical blending facility for the Wound Management Division of Smith-Nephew.
PTS Scope of Work: PTS was responsible for all the electrical and instrumentation and controls installation. This includes installation of all electrical conduit raceways, fittings, boxes, control systems and panels, panel boards, flow meters, flame arrestors, control valves, switches, transmitters, gauges, regulators, and rupture disks. We will also be doing all the testing of all the equipment and material.


Smith-Nephew Facility Tanks Replacement in Largo, Florida

Smith-Nephew, Inc.

General Contractor: AB PROCESS
Project Description: This project consisted of the replacement of the process' tanks as well as the mechanical equipment associated with it, such as motor-pumps and agitators.. 
PTS Scope of Work: PTS was responsible for all the electrical, instrumentation, and controls installation. Start up and commissioning, IQ/OQ support This includes instruments relocation, calibration and installation of all  new equipment, and programming the plant controls to meet the new equipment specifications.


Smith-Nephew Facility  Largo, Florida

Smith-Nephew, Inc.

Various Projects During several years PTS has been the TOGO  system integrator for the Smith & Nephew facility in largo, Florida.
PTS Scope of Work: PTS has performed multiple small size projects with a varieties of task that evolves from Instrumentation installation to engineering design.
Flower Bakery of Bradenton, Florida

Flower Food Bakery Group

On call support: PTS has served Flowers Bakery of Bradenton when time is crucial. Most of this work is been done during times when operation can't tolerate shutdowns. Allen-Bradley PLCs and controlnet network troubleshooting.
Pillsbury, Inc. located in Murfreesboro, Tennessee



 Pillsbury, Inc.

A&E: Simons Agra
Project Description: Upgrade controls on mixing and baking line
PTS Scope of Work:

Provide process assistance, control configuration and start-up expertise.  System consisted of Modicon Quantum PLCs using Intellution HMI

Sugar Mill located in South Bay, Florida


Owner: Okeelanta Corporation
Project Description: Vacuum Pan Controls upgrade
PTS Scope of Work: Electrical installation of control wiring for Foxboro I/A
Sugar Mill located in South Bay, Florida


Owner: Okeelanta Corporation
OEM: Rosemount
Project Description: Continuous Emissions Monitoring system for existing boiler.
PTS Scope of Work: Install, calibrate and start-up for the CEMs system.
Dairiconcepts in Portales, New Mexico




General Contractor: Garland & Loman, Inc.
A&E: Bayview Engineering Group
Project Description: This facility uses a new process developed in New Zealand that extracts certain proteins from milk and is made into a high protein powdered milk.
PTS Scope of Work: PTS will be installing a complete air user system in stainless steel and supply individual air supplies to devices where required. We will also be responsible for the installation of all the instruments in the evaporator and dryer process, mount all interconnecting remote terminal units, along with the main for PLC controls system for the process, and install all associated conduit and wiring of the complete control system.


The information on this page may not be reproduced, republished or mirrored on another webpage or website. Copyright 2012 PTS, Inc.